Power Daemon

From GCW Zero Wiki
Jump to: navigation, search

You can raise the Power button, then press a button on the GCW Zero to perform various system actions. The implemented actions are described below.

Note that Power must be raised first, and that if you raise it for 3 seconds before pressing another button, the device will be powered off.

Pressing another button after raising Power will cancel the power off countdown.

Button Action
Power (3 seconds) Power off (clean shutdown)
Power + Select Button + Select Button Restart (clean reboot)
Power + Dpad Up Raise audio volume by 1 step (out of 32)
Power + Dpad Down Lower audio volume by 1 step (out of 32)
Power + Dpad Right Raise brightness by 1 step (out of 27)
Power + Dpad Left Lower brightness by 1 step (out of 27)
Power + A Button Available since 2014-08-20 firmware
Toggle the hardware video scaler between "Fullscreen" and "Keep aspect ratio"
modes (supported software only).
Power + B Button Toggle mouse input mode
Power + Y Button Create a screenshot in (FTP) home/screenshots
Power + Select Button Terminate (SIGHUP) the foreground application, losing unsaved data